2021 Ford Truck F250 Super Duty Info Screen — Part # SD0983 — Square Deal Auto Parts · San Antonio, TX
Product Details
$250Part Number
SD0983
Vehicle
2021 Ford Truck F250 Super Duty
Description
Fitment & Buyer Verification
This Info Screen (part number SD0983) is designed for the 2021 Ford Truck F250 Super Duty equipped with an 8" SYNC 3 touchscreen system. It is important to verify the exact OEM part number correspondence, as the OEM causal part number for the Front Display Interface Module (FDIM) is 18B955, which is the primary display component for the SYNC 3 system in this vehicle. Buyers should confirm compatibility with their vehicle's SYNC version, screen size, and climate control configuration before purchase.
Vehicle Compatibility
Use these records to confirm the vehicle match before purchase.
| Check | What to verify | Buyer action | Basis |
|---|---|---|---|
| Vehicle Year | 2021 | Confirm this detail before ordering. | |
| Vehicle Make | Ford | Confirm this detail before ordering. | |
| Vehicle Model | Truck F250 Super Duty | Confirm this detail before ordering. | |
| SYNC Version | SYNC 3 (8" screen) | Confirm this detail before ordering. |
Configuration Details
Match trim, equipment, and listing-specific details against your vehicle.
| Check | What to verify | Buyer action | Basis |
|---|---|---|---|
| Screen Size | 8 inches | Confirm your vehicle has the 8" touchscreen before ordering to ensure compatibility. | |
| Climate Control Configuration | Dual-zone automatic climate control | Verify if your vehicle has dual-zone climate control as it affects module compatibility. | |
| OEM Part Number Match | Verify if SD0983 corresponds to OEM part 18B955 or KC3T-18B955-SA | Check OEM documentation or dealer to confirm the exact part number match before purchase. |
Included Component Checks
Review what appears to be included and what still needs confirmation.
| Component | Status | Note | Confidence |
|---|---|---|---|
| Front Display Interface Module (FDIM) | verify | Likely included as this is the main touchscreen display module, but confirm part number correspondence. | Medium |
| SYNC Module (APIM) | unknown | SYNC 3 module is a separate component; verify if included or sold separately. | Low |
| Audio Control Module (ACM) | unknown | ACM is a distinct module for audio functions and typically not included with the Info Screen. | High |
Buyer Verification Checklist
- Confirm your vehicle is a 2021 Ford Truck F250 Super Duty with an 8" SYNC 3 touchscreen.
- Verify the OEM part number on your existing module matches 18B955 or KC3T-18B955-SA to ensure correct fit.
- Check if your vehicle has dual-zone automatic climate control as it may affect module compatibility.
- Determine if you need the Front Display Interface Module only or additional modules like the SYNC APIM or Audio Control Module.
- If purchasing a used module, ensure it is pre-programmed to your vehicle's VIN or budget for programming services.
Condition & Inspection Notes
- Inspect the touchscreen for cracks, dead pixels, or unresponsive areas before installation.
- Verify all connector pins and wiring harnesses are intact and free of corrosion.
- Check for software version compatibility with your vehicle's SYNC system.
- Ensure no physical damage to the module casing or mounting points.
Product Fitment FAQs
The Info Screen SD0983 is compatible with 2021 Ford F250 Super Duty trucks equipped with an 8" SYNC 3 touchscreen. Compatibility depends on the exact OEM part number and vehicle configuration, so verification is required.
No, the Info Screen typically includes only the Front Display Interface Module (FDIM). The SYNC module (APIM) and Audio Control Module (ACM) are separate components and may need to be purchased separately.
Installation requires technical knowledge of vehicle electronics and may require programming. It is recommended to have a professional technician perform installation and programming.
References
- 2020‑2021 Ford F‑Super Duty – SYNC 3 – Various Touch Screen Concerns – Built on or before 08‑Mar‑2021 · NHTSA / Manufacturer SSM via OEM DTC
- SYNC 3 (8") Replacement Modules for Ford F‑Series · 4D Tech, Inc.
- 2021‑2022 Ford Super Duty Audio Control Module (ACM) Failure: No Sound, Popping, and Diagnosis · Go‑Parts.com (Wrenchy)
Dealer Information
Dealer area: San Antonio, TX. Exact dealer coordinates are unavailable; call to confirm the address.
More Info Screen options
Filtering for Ford Truck F250 Super Duty (2021)Scan and sort nearby inventory without leaving this page. Use search to filter by price, part number, or city.
No Data Available
Please check back soon when more inventory is available for this part.
