2013 Ford Truck F250 Super Duty Ignition Module — Part # 00019371 — Charlie Johns Auto Salvage-PRP Freight, CDC · Horse Cave, KY
Product Details
$596.75Part Number
00019371
Vehicle
2013 Ford Truck F250 Super Duty
Description
Fitment & Buyer Verification
This part number DC3A-12A650-AUE corresponds to an Engine Control Module (ECM/ECU) for 6.2L Ford Truck F250 Super Duty models from approximately 2013 to 2016. Although listed as an Ignition Module, it is actually an ECM requiring vehicle-specific programming and PATS key programming for proper operation.
Vehicle Compatibility
Use these records to confirm the vehicle match before purchase.
| Check | What to verify | Buyer action | Basis |
|---|---|---|---|
| Vehicle Model | 2013 Ford Truck F250 Super Duty | Confirm this detail before ordering. | |
| Engine Displacement | 6.2L | Confirm this detail before ordering. |
Configuration Details
Match trim, equipment, and listing-specific details against your vehicle.
| Check | What to verify | Buyer action | Basis |
|---|---|---|---|
| Module Part Number | DC3A-12A650-AUE | Verify the part number on the original module matches DC3A-12A650-AUE exactly before ordering. | |
| Programming Requirement | VIN-specific programming and PATS key programming required | Ensure the module is programmed to the correct VIN and keys are programmed or re-initialized using Ford IDS or a qualified locksmith. | |
| Programmable Module Installation (PMI) | PMI procedure required for module configuration and relearning | Confirm availability of as-built data for PMI setup; if unavailable, dealer or Ford Technical Hotline assistance may be needed. |
Included Component Checks
Review what appears to be included and what still needs confirmation.
| Component | Status | Note | Confidence |
|---|---|---|---|
| Engine Control Module (ECM/ECU) | confirmed | This part is an ECM for the 6.2L Ford F250 Super Duty, not a traditional ignition module. | High |
Buyer Verification Checklist
- Verify the module part number matches DC3A-12A650-AUE exactly.
- Confirm the module is programmed to the correct vehicle VIN.
- Ensure PATS key programming or re-initialization is performed.
- Check availability of as-built data for PMI programming.
- Confirm fitment compatibility with 2013-2016 Ford Truck F250 Super Duty 6.2L models.
Condition & Inspection Notes
- Inspect the module for physical damage or corrosion before installation.
- Verify connectors and pins are intact and clean.
- Confirm the module has been tested and is functional if possible.
Product Fitment FAQs
No, despite the listing title, this part number DC3A-12A650-AUE is an Engine Control Module (ECM) for the 6.2L Ford F250 Super Duty, not a standard ignition module.
Yes, this ECM requires VIN-specific programming and PATS key programming using Ford IDS or a qualified locksmith for proper operation.
Installation requires following the Programmable Module Installation (PMI) procedure, and access to as-built data may be necessary. Dealer or Ford Technical Hotline support may be needed.
References
- 13‑16 FORD F‑250 F‑350 6.2L ECU ECM PCM ENGINE COMPUTER DC3A‑12A650‑AUE TESTED · Your Part Source (YPS‑USA)
Dealer Information
Dealer area: Horse Cave, KY. Exact dealer coordinates are unavailable; call to confirm the address.
More Ignition Module options
Filtering for Ford Truck F250 Super Duty (2013)Scan and sort nearby inventory without leaving this page. Use search to filter by price, part number, or city.
No Data Available
Please check back soon when more inventory is available for this part.
