2012 Ford Truck F250 Super Duty Ignitor/Coil 508016
Product Details
$29Part Number
508016
Vehicle
2012 Ford Truck F250 Super Duty
Description
Fitment & Buyer Verification
This ignitor coil is designed for the 2012 Ford Truck F250 Super Duty equipped with the 6.2L V8 engine, which uses a coil-on-plug ignition system. Buyers should verify the part number 508016 against OEM or reputable aftermarket equivalents to ensure correct side and cylinder bank fitment.
Vehicle Compatibility
Use these records to confirm the vehicle match before purchase.
| Check | What to verify | Buyer action | Basis |
|---|---|---|---|
| Vehicle Model | 2012 Ford Truck F250 Super Duty | Confirm this detail before ordering. | |
| Engine Type | 6.2L V8 gasoline engine | Confirm this detail before ordering. |
Configuration Details
Match trim, equipment, and listing-specific details against your vehicle.
| Check | What to verify | Buyer action | Basis |
|---|---|---|---|
| Ignition System Type | Coil-on-plug (COP) ignition system | Confirm that your vehicle uses a coil-on-plug ignition system for the 6.2L engine before ordering. | |
| Side Specificity | Right (Passenger) or Left (Driver) side coil | Verify the coil side and cylinder location as OEM coils have distinct part numbers for each side. |
Included Component Checks
Review what appears to be included and what still needs confirmation.
| Component | Status | Note | Confidence |
|---|---|---|---|
| Ignition Coil | confirmed | Includes the coil assembly compatible with the 6.2L V8 COP system. | High |
| Coil Boot | likely | Typically includes the coil boot; verify moisture protection and condition upon installation. | Medium |
Buyer Verification Checklist
- Verify the OEM or reputable equivalent part number matches your vehicle's side and cylinder bank (e.g., AL3Z-12029-A/B).
- Inspect coil boots for moisture or corrosion before installation.
- Test suspect coils by swapping cylinders to isolate faults from PCM issues.
- Check connector wiring for proper voltage and continuity.
- Inspect for wiring damage or interference, especially near cylinder #5 per TSB 18-2047.
- Replace spark plugs concurrently with coils to reduce voltage stress.
- Apply dielectric grease to coil boots to prevent moisture intrusion.
Condition & Inspection Notes
- Check coil for cracks, corrosion, or damaged connectors.
- Ensure coil boots are intact and free of moisture.
- Inspect wiring harness and connectors for wear or damage.
Product Fitment FAQs
This coil is compatible specifically with the 6.2L V8 gasoline engine equipped with a coil-on-plug ignition system. It is not compatible with diesel engines or other configurations.
Misfire codes can be caused by faulty coils, damaged wiring, or PCM issues. Swap the coil with another cylinder to isolate the problem and check wiring continuity. Refer to diagnostic guides for codes P0351 through P0358.
References
Dealer Information
Dealer area: Kirtland, NM. Exact dealer coordinates are unavailable; call to confirm the address.
More Ignitor/Coil options
Filtering for Ford Truck F250 Super Duty (2012)Scan and sort nearby inventory without leaving this page. Use search to filter by price, part number, or city.
No Data Available
Please check back soon when more inventory is available for this part.
