2010 Ford Truck F250 Super Duty Ignition Module — Part # W000176 — Patterson Auto Wrecking-PRP Freight, ARA, CDC · Cochranton, PA
Product Details
$677.5Part Number
W000176
Vehicle
2010 Ford Truck F250 Super Duty
Description
Fitment & Buyer Verification
This ignition module is listed for the 2010 Ford Truck F250 Super Duty with a 5.4L engine. The vehicle uses a coil-on-plug ignition system managed by the Powertrain Control Module (PCM). However, the specific part number W000176 is not confirmed by authoritative OEM sources as the ignition module for this vehicle, so buyers should verify fitment carefully.
Vehicle Compatibility
Use these records to confirm the vehicle match before purchase.
| Check | What to verify | Buyer action | Basis |
|---|---|---|---|
| Vehicle Model | 2010 Ford Truck F250 Super Duty | Confirm this detail before ordering. | |
| Engine Type | 5.4L V8 gasoline | Confirm this detail before ordering. |
Configuration Details
Match trim, equipment, and listing-specific details against your vehicle.
| Check | What to verify | Buyer action | Basis |
|---|---|---|---|
| Module Programming Requirement | Programmable Module Installation (PMI) procedure required | Ensure the replacement ignition module is programmable and follow the PMI procedure using Ford’s Integrated Diagnostic System (IDS) after installation. | |
| Connector and Mounting Compatibility | Verify connector type and mounting match vehicle harness | Confirm the ignition module’s connector and mounting points are compatible with your vehicle’s existing wiring and mounting locations before purchase. |
Included Component Checks
Review what appears to be included and what still needs confirmation.
| Component | Status | Note | Confidence |
|---|---|---|---|
| Ignition Module | verify | The part is described as an electronic control module for ignition, but the exact components included are not confirmed. | Medium |
Buyer Verification Checklist
- Verify part number W000176 applicability with a Ford dealer or official parts catalog using your vehicle’s VIN.
- Confirm the engine type is 5.4L gasoline to ensure ignition system compatibility.
- Ensure the ignition module supports PMI programming and obtain installation instructions.
- Check connector type, mounting, and pin-out compatibility with your vehicle.
Condition & Inspection Notes
- Inspect the ignition module for physical damage or corrosion before installation.
- Verify that the module’s connectors are clean and undamaged.
- Confirm that the module is compatible with your vehicle’s ignition system version.
Product Fitment FAQs
No authoritative OEM source confirms that part number W000176 corresponds to the ignition module for this vehicle. Buyers should verify fitment with a Ford dealer or official parts catalog.
Yes, replacement ignition modules for Ford vehicles typically require programming using the Programmable Module Installation (PMI) procedure with Ford’s Integrated Diagnostic System (IDS).
References
- Ignition System: 5.4 L and 6.8 L coil‑on‑plug description · Operation CHARM (Service Manual)
- Programmable Module Installation (PMI) procedure for 2010 F‑250 Super Duty · Operation CHARM (Service Manual)
Dealer Information
Dealer area: Cochranton, PA. Exact dealer coordinates are unavailable; call to confirm the address.
More Ignition Module options
Filtering for Ford Truck F250 Super Duty (2010)Scan and sort nearby inventory without leaving this page. Use search to filter by price, part number, or city.
No Data Available
Please check back soon when more inventory is available for this part.
