2008 Ford Truck F250 Super Duty Inside Door Handle — Part # 324 — Clark's Auto Salvage · East Freedom, PA
Product Details
$20Part Number
324
Vehicle
2008 Ford Truck F250 Super Duty
Description
Fitment & Buyer Verification
This inside door handle is designed specifically for the 2008 Ford Truck F250 Super Duty, compatible with various engine and transmission configurations including 5.4L V8, 6.0L Diesel, 6.2L Gas, 6.4L Diesel Twin Turbo, 6.7L Diesel, and 6.8L V10 engines, supporting both manual and automatic transmissions as well as four-wheel and rear-wheel drive variants.
Vehicle Compatibility
Use these records to confirm the vehicle match before purchase.
| Check | What to verify | Buyer action | Basis |
|---|---|---|---|
| Vehicle Year | 2008 | Confirm this detail before ordering. | |
| Vehicle Make | Ford | Confirm this detail before ordering. | |
| Vehicle Model | Truck F250 Super Duty | Confirm this detail before ordering. |
Configuration Details
Match trim, equipment, and listing-specific details against your vehicle.
| Check | What to verify | Buyer action | Basis |
|---|---|---|---|
| Build Date Range | December 3, 2007 to November 1, 2010 | Verify your vehicle’s build date on the VIN or door jamb sticker to ensure compatibility with this inside door handle. | |
| Door Side and Position | Driver or Passenger side, front or rear door | Confirm whether the handle is for the driver or passenger side and front or rear door, as part numbers differ by door location. |
Included Component Checks
Review what appears to be included and what still needs confirmation.
| Component | Status | Note | Confidence |
|---|---|---|---|
| Inside Door Handle Assembly | confirmed | Includes the inner door handle assembly designed to replace OEM part number 6C3Z-2522600-AAA or superseded F81Z-2522600-BA. | High |
Buyer Verification Checklist
- Check the build date on your VIN or door jamb sticker to confirm it falls within December 3, 2007 to November 1, 2010.
- Match the OEM part number 6C3Z-2522600-AAA or verify if your existing part is the superseded F81Z-2522600-BA.
- Confirm the door side (driver or passenger) and door position (front or rear) for correct fitment.
- Inspect your door panel for two 9 mm nuts securing the inner handle to ensure compatibility with replacement procedures.
Condition & Inspection Notes
- Inspect the handle for any visible damage or wear before installation.
- Ensure mounting points and connecting rods or cables are intact and compatible.
Product Fitment FAQs
Yes, this handle fits a wide range of engine types including 5.4L V8, 6.0L Diesel, 6.2L Gas, 6.4L Diesel Twin Turbo, 6.7L Diesel, and 6.8L V10 engines.
Check your vehicle’s build date on the VIN or door jamb sticker to ensure it falls between December 3, 2007 and November 1, 2010, and confirm the door side and position.
Typically, you will need a 9 mm socket or wrench to remove the two nuts securing the handle, along with tools to remove the inner door panel and disconnect rods or cables.
References
- 2008 Ford F‑250 Super Duty Door Handle Assembly Inner (OEM part) · FordPartsGiant
- How to Replace Interior Door Handles 1999‑15 Ford F‑250 Super Duty · 1A Auto
- 2008‑2010 Ford Super Duty Door Latch Compatibility Guide · Go‑Parts.com Garage
Dealer Information
Dealer area: East Freedom, PA. Exact dealer coordinates are unavailable; call to confirm the address.
More Inside Door Handle options
Filtering for Ford Truck F250 Super Duty (2008)Scan and sort nearby inventory without leaving this page. Use search to filter by price, part number, or city.
No Data Available
Please check back soon when more inventory is available for this part.
