2000 Ford Excursion Axle Shaft WW12596X
Product Details
$51.75Part Number
WW12596X
Vehicle
2000 Ford Excursion
Description
Fitment & Buyer Verification
This axle shaft is intended for the right-hand rear axle of 2000 Ford Excursion models, featuring a 10.5-inch ring gear and 35 spline count. Compatibility should be verified against vehicle-specific axle configurations including Dana 50 or Dana 60 axle types and full-floating or semi-floating designs.
Vehicle Compatibility
Use these records to confirm the vehicle match before purchase.
| Check | What to verify | Buyer action | Basis |
|---|---|---|---|
| Model Year | 2000 Ford Excursion | Confirm this detail before ordering. | |
| Ring Gear Diameter | 10.5 inches | Confirm this detail before ordering. | |
| Spline Count | 35 splines (passenger side typical) | Confirm this detail before ordering. |
Configuration Details
Match trim, equipment, and listing-specific details against your vehicle.
| Check | What to verify | Buyer action | Basis |
|---|---|---|---|
| Axle Side | Right-hand rear | Confirm your vehicle requires a right-hand rear axle shaft before ordering. | |
| Included Hardware | No bearings, seals, or mounting hardware included | Purchase additional components as needed for installation. | |
| OE Part Number Verification | WW12596X unconfirmed; verify against OE numbers like 5C3Z-4234-AB | Check your axle housing tag or service manual for exact OE part number. |
Included Component Checks
Review what appears to be included and what still needs confirmation.
| Component | Status | Note | Confidence |
|---|---|---|---|
| Axle Shaft | confirmed | Right-hand rear axle shaft with 10.5-inch ring gear and 35 splines. | High |
| Bearings | verify | Not included; buyer should confirm if additional bearings are required. | High |
| Seals | verify | Not included; verify if seals are needed for installation. | High |
Buyer Verification Checklist
- Verify ring gear diameter is 10.5 inches for your axle.
- Confirm spline count matches your vehicle’s axle (35 splines for passenger side).
- Check if your axle is Dana 50 or Dana 60 and full-floating or semi-floating.
- Confirm OE part number compatibility with your vehicle’s axle housing.
- Determine if additional hardware such as bearings or seals are needed.
Condition & Inspection Notes
- Inspect shaft for straightness and absence of cracks or damage.
- Check spline teeth for wear or deformation.
- Verify mounting surfaces are clean and undamaged.
Product Fitment FAQs
No, this axle shaft typically does not include bearings, seals, or mounting hardware. These components must be purchased separately if needed.
Check your vehicle’s axle ring gear diameter (10.5 inches), spline count (usually 35 for passenger side), and OE part number on your axle housing tag or service manual to ensure compatibility.
It refers to the diameter of the ring gear in the axle assembly, which is 10.5 inches. This dimension is critical for matching the axle shaft to your vehicle’s differential.
References
- https://business.walmart.com/ip/Dorman-Oe-Solutions-Axle-Shaft-Fits-2000-Ford-Excursion/159737928?utm_source=openai · business.walmart.com
- https://www.carid.com/dorman/product-mpn-630-615.html?utm_source=openai · www.carid.com
- https://www.mdwparts.com/documents/EXCEL_CAT.pdf?utm_source=openai · www.mdwparts.com
Dealer Information
Dealer area: Toledo, OH. Exact dealer coordinates are unavailable; call to confirm the address.
More Axle Shaft options
Filtering for Ford Excursion (2000)Scan and sort nearby inventory without leaving this page. Use search to filter by price, part number, or city.
No Data Available
Please check back soon when more inventory is available for this part.
